The DT9847 Series of USB dynamic signal analyzers

The DT9847 Series of USB dynamic signal analyzers provide highly accurate measurements for sound and vibration measurements. Up to two analog outputs are available. Features include an A/D per channel, simultaneous analog I/O, wide bandwidth, low harmonic distortion, and IEPE signal conditioning for direct sensor measurements.

The DT9847 Series are high-accuracy, dynamic signal acquisition modules designed for sound and vibration applications. These modules are ideal for precision measurements with microphones, accelerometers, and other transducers that have a large dynamic range. Common applications include audio, acoustic, and vibration testing.

Combine the DT9847 with the ready-to-measure QuickDAQ application to create a powerful FFT Analyzer instrument. Additionally, all Data Translation devices include comprehensive driver and software support, and interface tools for LabVIEW™ and MATLAB® programmers.

Key Features:

• Simultaneous analog input and waveform analog output operations
• Analog input subsystem:
  • Up to three, simultaneous 24-bit A/D converters
  • Sample rate from 1 kS/s to 216 kS/s
  • Input range of ±10 V with software-selectable gains of 1 and 10 for an effective input range of ±10 V and ±1 V
  • Support for Integrated Electronic Piezoelectric (IEPE) inputs, including use of a 4 mA current source with 18 V compliance voltage for AC or DC coupling
  • Supports a start trigger for acquiring pre-trigger samples and a reference trigger for acquiring post-trigger samples. Specify the number of post-trigger samples to acquire before stopping
    the operation.
  • For the start trigger, supports a softwareprogrammable trigger source (software, external digital trigger, or a positive- or negative-going analog threshold trigger on any of the analog input channels). The threshold trigger can be programmed for a value from ±10 V.
  • For the reference trigger, supports a positive- or negative-going analog threshold trigger on any of the analog input channels. The threshold trigger can be programmed for a value from ±10 V
• Analog output subsystem:
  • Up to two 32-bit D/A converters
  • Single value, waveform, and continuous streaming output
  • Programmable output rate from 30 kS/s to 216 kS/s
  • Output range of ±10 V and ±3 V
  • Software-programmable trigger source (software trigger or external digital trigger) to start the analog output operation
• Internal clock source (shared between the analog input and analog output subsystems)
• Sync Bus (RJ45) connector for synchronizing acquisition on up to four DT9847 Series modules

USB Dynamic Signal Analyzer – DT9847 series includes products:

• DT9847-2-2
• DT9847-3-1

*Learn more about MCC: Here

*Fanpage: DIGI TECHNOLOGIES