Simultaneous Multifunction PCI Board DT3016-PBF

The DT3016 PCI data acquisition (DAQ) board provides simultaneous analog input and output at full speed with flexible triggering and clocking capabilities. Additional features include software-selectable gain settings, digital I/O, and four counter/timers. Additional features include software-selectable gain settings, digital I/O, and four counter/timers.

KEY HIGHLIGHTS ABOUT DT3016

• Programmable bipolar (± 10 V) and unipolar (0 to 10 V) input ranges in 1, 2, 4 and 8 increments
• Scanning is continuously paced and enabled.
• 1024 position channel list supports sampling of analog input channels with the same or different gain in sequential or random order.
• Up to 256 scans per trigger for a total of 262,144 samples per trigger
• Master PCI bus for data transfer
• Pre-, post-, and trigger-range acquisition modes let the board collect PCI data related to external events using computer memory.
• Internal and external clock source; one external clock input for the analog input subsystem and one external clock input for the analog output subsystem
• The PCI-PBF data acquisition board activates the analog threshold using an external analog input or one of the analog input channels; a separate DAC sets the trigger level (8-bit resolution, fixed delay) Digital TTL trigger; one external hardware TTL input for the analog input subsystem and one external hardware TTL input for the analog output subsystem.
• PCI data acquisition board Simultaneously analog input and analog output operation at full speed
• Software calibration of analog input and output subsystem
• Two 8-bit digital ports programmable as input or output on a per-port basis; digital input can be included as part of the analog input channel list for time correlation of analog and digital events; digital output can drive external solid-state relay.
• Two high-speed, dynamic digital outputs; Useful for external device synchronization and control, these dynamic digital output lines are programmable as part of an analog input subsystem using the DataAcq SDK
• Programmable Port Types
• Programmable pulse output terminals (output type) and duty cycle
• A/D sample clock output and A/D trigger output signal, useful for external device synchronization and control

*Learn more about MCC: Here

*Fanpage: DIGI TECHNOLOGIES