MCC 152 voltage output and DIO DAQ HAT for Raspberry Pi®
The MCC 152 Voltage Output and DIO HAT provides two channels of analog voltage output and eight digital I/O for Raspberry Pi based systems. The 12-bit voltage outputs feature a 0-5 V range and can be updated at up to 5 kS/s. Up to eight MCC DAQ HAT devices can be stacked onto one Raspberry Pi.
All MCC DAQ HATs provide easy-to-use C/C++® and Python™ open-source libraries and examples allowing you to take reliable, quality measurements quickly.
The MCC 152 is a voltage output and digital input/output HAT (Hardware Attached on Top) designed for use with Raspberry Pi, the most popular single-board computer on the market today A HAT is an add-on board with a 40W GPIO (general purpose input/output) connector that conforms to the Raspberry Pi HAT specification.
The MCC 152 HAT provides two analog outputs and eight digital I/O bits. Up to eight MCC HATs can be stacked onto one Raspberry Pi. With CMOS input thresholds, selectable voltage operation, and 5 V tolerance for the digital inputs, the digital channels support both 3.3 V and 5 V logic types.
Features of MCC 152 voltage output and DIO DAQ HAT for Raspberry Pi®:
- Two 12-bit simultaneous voltage outputs
- 5 mA output drive, sourcing
- 0.8 V/µs slew rate
- Eight bidirectional digital bits
- 5V / 3.3V operation; CMOS input thresholds
- Programmable input polarity
- Screw terminal connections
- Stack up to eight MCC HATs onto a single Raspberry Pi
*Learn more about MCC: Here
*Fanpage: DIGI TECHNOLOGIES
ANALOG OUTPUT | ||||
CHANNELS | RESOLUTION | SPEED | ||
2 | 12-bit | 5 kS/s — SW paced | ||
DIGITAL I/O | ||||
CHANNELS | COUNTER/TIMERS | ENCODER | ||
8 | — | — |
SOFTWARE | POWER | |
OS SUPPORT | DRIVERS | POWER |
Linux®, Raspbian® | DAQ HAT Library™ | Provided by RPi |