Cảm biến đo gió – NRG 40C
Cảm biến đo gió NRG 40C là một trong những máy đo gió đầu tiên được thiết kế dành riêng cho ngành công nghiệp năng lượng gió.
Máy đo gió 40C đã ghi lại tốc độ gió 96 m/s (214 dặm/giờ). Vòng bi và mômen quán tính thấp của chúng cho phép phản ứng rất nhanh với gió giật và tạm lắng. Do tính tuyến tính đầu ra của các cảm biến này, khiến chúng lý tưởng để sử dụng với các hệ thống truy xuất dữ liệu khác nhau. Một nam châm bốn cực gây ra hiệu điện thế sóng hình sin vào cuộn dây, tạo tín hiệu ra có tần số tỉ lệ với tốc độ gió.
Được cấu tạo từ các cốc Lexan chắc chắn, NRG 40C được đúc liền thành một mảnh để có hiệu suất lặp lại. Đi kèm với mỗi máy đo gió đều có một khởi động đầu cuối bằng cao su để bảo vệ khỏi các yếu tố.
Chứng chỉ hiệu chuẩn MEASNET có sẵn cho mỗi cảm biến đo gió NRG 40C.
Liên hệ ngay để được tư vấn hoàn toàn miễn phí về cảm biến đo gió NRG 40C.
*Tìm hiểu thêm về NRG: Tại đây
*Fanpage: DIGI TECHNOLOGIES
The 40C Anemometer offers field-proven measurement accuracy at an economical price.
MEASNET Calibrated (#1900) | CPH MEASNET Calibrated (#4350) | |
---|---|---|
DESCRIPTION | ||
Sensor type | 3 Cup Anemometer | 3 Cup Anemometer |
Applications |
|
|
Sensor range | 1 m/s to 96 m/s (2.2 mph to 215 mph) (highest recorded) | 1 m/s to 96 m/s (2.2 mph to 215 mph) (highest recorded) |
Instrument compatibility | All NRG loggers | All NRG loggers |
OUTPUT SIGNAL | ||
Signal type | Low level AC sine wave, frequency linearly proportional to wind speed | Low level AC sine wave, frequency linearly proportional to wind speed |
Anemometer Transfer Function |
|
See individual calibration report |
Output voltage at threshold | 80 mV (peak-to-peak) minimum | 80 mV (peak-to-peak) minimum |
Output voltage at 60Hz |
|
|
Calibration | Each anemometer individually calibrated, calibration reports provided via electronic download | Each anemometer individually calibrated, calibration reports provided via electronic download |
Output signal range | 0 Hz to 125 Hz (at 96m/s, highest recorded) | 0 Hz to 125 Hz (at 96m/s, highest recorded) |
Uncertainty | Accuwind (Riso-R-1556) Classification:
|
Accuwind (Riso-R-1556) Classification:
|
RESPONSE CHARACTERISTICS | ||
Distance constant (63% recovery) |
|
|
Moment of inertia |
|
|
Swept diameter of rotor | 190 mm (7.5 inches) | 190 mm (7.5 inches) |
INSTALLATION | ||
Mounting | Onto a 13 mm (0.5") diameter mast with cotter pin and set screw | Onto a 13 mm (0.5") diameter mast with cotter pin and set screw |
Tools required | 0.25 inch nut driver, petroleum jelly, electrical tape | 0.25 inch nut driver, petroleum jelly, electrical tape |
ENVIRONMENTAL | ||
Operating temperature range | -55 °C to 60 °C (-67 °F to 140 °F) | -55 °C to 60 °C (-67 °F to 140 °F) |
Operating humidity range | 0 to 100% RH | 0 to 100% RH |
PHYSICAL | ||
Connections | 4-40 brass hex nut/post terminals | 4-40 brass hex nut/post terminals |
Weight | 0.14 kg (0.3 lbs) | 0.14 kg (0.3 lbs) |
Dimensions |
|
|
MATERIALS | ||
Cups | One piece injection-molded black polycarbonate | One piece injection-molded black polycarbonate |
Body | Housing is black ABS plastic | Housing is black ABS plastic |
Shaft | Beryllium copper, fully hardened | Beryllium copper, fully hardened |
Bearing | Modified Teflon, self-lubricating | Modified Teflon, self-lubricating |
Magnet | Indox 1, 25 mm (1 inch) diameter, 13 mm (0.5 inch) long, 4 poles | Indox 1, 25 mm (1 inch) diameter, 13 mm (0.5 inch) long, 4 poles |
Coil | Single coil, bobbin wound, 4100 turns of #40 wire, shielded for ESD protection | Single coil, bobbin wound, 4100 turns of #40 wire, shielded for ESD protection |
Boot | Protective PVC sensor terminal boot included | Protective PVC sensor terminal boot included |
Terminals | Brass | Brass |
- Đánh giá tài nguyên gió