Bộ ghi dữ liệu khảo sát năng lượng gió – SymphoniePRO
SymphoniePRO là bộ ghi dữ liệu công suất thấp, cấp công nghiệp được thiết kế đặc biệt để thực hiện đánh giá tài nguyên cho ngành năng lượng tái tạo (khảo sát năng lượng gió). Với các tùy chọn cho bảng đấu dây 26 kênh hoặc 16 kênh, công suất đo lường của bộ ghi có thể được tối ưu hóa khi cần thiết. Giá trị thống kê của mỗi kênh được tính toán từ các mẫu dữ liệu 1 giây liên tục và được tính trung bình trong một khoảng thời gian do người dùng lựa chọn (mặc định 10 phút). Dữ liệu đã thu thập được lưu trữ hiệu quả dưới dạng tệp nhị phân* .RLD trên bộ nhớ Flash bên trong với bản sao dự phòng trên thẻ SD bên ngoài, nếu được cài đặt.
Dữ liệu được truyền và hệ thống được cấp nguồn qua dòng mô-đun nguồn và giao tiếp Symphonie iPackGPS của chúng tôi. Chỉ yêu cầu nâng cấp firmware để tương thích với bộ ghi dữ liệu mới. Ngoài việc gửi dữ liệu qua email SMTP, bộ ghi dữ liệu khảo sát năng lượng gió SymphoniePRO cho phép khả năng kết nối từ xa, thời gian thực qua giao thức MetLink của chúng tôi cho các tác vụ như tải xuống dữ liệu tự động hoặc thủ công, nâng cấp chương trình cơ sở, xem dữ liệu trực tiếp hoặc thay đổi cấu hình.
Ứng dụng SymphoniePRO Desktop là một gói phần mềm PC hiện đại và trực quan. Được sử dụng để xử lý các tệp dữ liệu thô cũng như cấu hình và giao tiếp với bộ ghi dữ liệu SymphoniePRO và iPack. Ứng dụng SymphoniePRO Desktop theo dõi dữ liệu trang web và tạo ra các tệp văn bản phân cách bằng tab (ASCII) linh hoạt tương thích với phần mềm hàng đầu trong ngành. Ngoài ra, phần mềm cho phép người dùng xem dữ liệu “trực tiếp”, áp dụng các bản cập nhật chương trình cơ sở cho bộ ghi dữ liệu và iPacks, cũng như xem trước các tệp dữ liệu ở định dạng chuỗi thời gian.
Liên hệ ngay cho chúng tôi để được tư vấn hoàn toàn miễn phí về SymphoniePRO
*Tìm hiểu thêm về NRG: Tại đây
*Fanpage: DIGI TECHNOLOGIES
26-Channel (#8547) | 16-Channel (#11270) | |
---|---|---|
DESCRIPTION | ||
Instrument type | 26 channel internet-enabled micropower data logger for the renewable energy industry | 16 channel internet-enabled micropower data logger for the renewable energy industry |
Applications | Wind and solar resource assessment, power performance monitoring, and forecasting | Wind and solar resource assessment, power performance monitoring, and forecasting |
Instrument compatibility | Symphonie iPack Communication + Power Modules:
|
Symphonie iPack Communication + Power Modules:
|
DATA COLLECTION | ||
Sampling interval | 1 Hz (IEC 61400-12-1 compliant) | 1 Hz (IEC 61400-12-1 compliant) |
Averaging interval | 10-minute by default; user-selectable alternatives (1, 2, 5, 10, 15, 30, and 60 minutes) | 10-minute by default; user-selectable alternatives (1, 2, 5, 10, 15, 30, and 60 minutes) |
Real time clock | Internal battery-backed with GPS or internet time synchronization (with iPack) | Internal battery-backed with GPS or internet time synchronization (with iPack) |
Storage medium |
|
|
Channel Capacity |
|
|
Counter Channels Sensor Compatibility | Compatible with a wide array of industry-standard anemometers including:
|
Compatible with a wide array of industry-standard anemometers including:
|
Analog Channels Sensor Compatibility | Compatible with a wide array of sensors including:
|
Compatible with a wide array of sensors including:
|
Analog Measurement Accuracy | 0.04% of full scale | 0.04% of full scale |
RS-485 Channels Sensor Compatibility | Contact NRG to discuss support for specific model types | n/a |
Parameters recorded for each channel |
|
|
Data delivery |
|
|
Security |
|
|
RESOLUTION | ||
Analog measurement resolution | 16-bit A/D conversion (76 uV resolution across 5 V range) | 16-bit A/D conversion (76 uV resolution across 5 V range) |
SOFTWARE | ||
Type | Windows (7 or later) compatible application | Windows (7 or later) compatible application |
Capabilities |
|
|
CONFIGURATION | ||
User interface |
|
|
Configurable parameters |
|
|
CONNECTIONS | ||
Sensor wiring |
|
|
Expansion slots | Seven (7) signal conditioning module slots accept analog P-SCMs | Three (3) Analog channels configurable with P-SCM signal conditioning modules |
Communication ports |
|
|
POWER REQUIREMENTS | ||
Batteries |
|
|
External power input | Provided by iPack | Provided by iPack |
External solar input | Provided by iPack | Provided by iPack |
External power output | Provided by iPack (iPackACCESS only) | Provided by iPack (iPackACCESS only) |
INSTALLATION | ||
Mounting |
|
|
Tools required |
|
|
ENVIRONMENTAL | ||
Operating temperature range | -40 °C to 65 °C (-40 °F to 149 °F) | -40 °C to 65 °C (-40 °F to 149 °F) |
Operating humidity range |
|
|
PHYSICAL | ||
Weight | 1.3 Kg (2.6 lbs) including batteries | 1.3 Kg (2.6 lbs) including batteries |
Dimensions |
|
Logger (including wiring panel): 22.2 cm x 20.1 cm x 7.6 cm (8.7 in. x 7.9 in. x 3.0 in.) |
MATERIALS | ||
Wiring panel | Formed aluminum enclosure, zinc-plated screws and terminals |
|
Enclosure | Weatherproof polycarbonate | Weatherproof polycarbonate |
- Đánh giá tài nguyên gió
- Tối ưu hóa Nhà máy gió