Filter media test rig in accordance to DIN EN 1822-3 and ISO 29463-3 with U-SMPS for determination of MPPS range
MFP Nano Plus system
- Particle size measurements from 10 nm
- Internationally comparable measurement results in accordance with DIN EN 1822-3 and ISO 29463-3
- Simple use of different test aerosols, such as NaCl / KCl or DEHS (others on request)
- Easily movable dilution cascades with factors of 10, 100, 1,000 and 10,000 for measurements with salt or DEHS
- Simple measurement of the fraction separation efficiency and determination of the MPPS range
- High reproducibility of the testing method
- Flexible filter test rig software FTControl
- Easy to operate; even untrained personnel can be instructed quickly in the use of the equipment
- Cleaning can be performed autonomously by the customer
- Short set-up times
- Mobile setup, easy to move on castors
- Validation of the clear function of individual components and the overall system during pre-delivery acceptance testing and upon delivery
- Reliable operation
- Low-maintenance
- Cut your operating costs with the MFP Nano Plus filter media inspection system
*Learn more about Palas: Here
*Fanpage: DIGI TECHNOLOGIES
Technical Data |
Values |
---|---|
Measurement range (size) | U-SMPS: 10 – 800 nm |
Volume flow | 0,48 – 5,76 m³/h (Pressurized Operation) |
Power supply | 115/230 V, 50/60 Hz |
Dimensions | Approx. 760 • 2100 • 985 mm (W • H • D) |
Inflow velocity | 1.3 – 16 cm/s (Other types on request) |
Measurement of differential pressure | 0 – 2500 Pa (Others on request) |
Test area | 100 cm² |
Aerosols | Dust (excample: SAE dust), salt (example: NaCl, KCl), liquid aerosol (eg DEHS) |
Compressed air supply | 6 – 8 bar |
- For filter media and small filter elements
- Product development / production control
- Test capabilities related to EN 1882-3 (HEPA/ULPA) and ISO 29463-3
- Effective measurement of fractions in the range from approx. 20 nm to 1 µm