.svg){kind=small}
Infrared thermometer – testo 830 T1
The testo 830-T1 IR thermometer with laser measurement spot marker and 10:1 optics is suitable for non-contact surface temperature measurements in trade and industry.
Overview of the advantages of the testo 830-T1 infrared thermometer
- High resolution processor for utmost accuracy (resolution 0.1 °C)
- 10:1 optics for precise measurements even at medium distances
- IR thermometer with 1 point laser measurement spot marker to target the measuring point
- Two alarm limit values that can be defined as required
- Visual and acoustic alarm if limit value exceeded
- Min./max. value display and hold function (to record a measured value)
- Convenient one-handed operation thanks to the ergonomic gun-style design
- Clear, illuminated digital display
The speed of the testo 830-T1 IR thermometer is impressive: it can take two measurements a second. This means you can undertake bigger measuring tasks fast and efficiently.
The infrared thermometer emission level can be individually set. This allows you to adjust it precisely to the material of the surface being measured to achieve the best possible measurement results. For untreated surfaces with a low emission level, we recommend using an emission tape (optional) which makes the IR measurement significantly easier.
Temperature - Infrared |
|
|---|---|
| Measuring range | -30 to +400 °C |
| Accuracy | ±1.5 °C or ±1.5 % of mv (+0.1 to +400 °C) ±2 °C or ±2 % of mv (-30 to 0 °C) (the higher value applies) |
| Measuring rate | 0.5 s |
| Infrared resolution | 0.1 °C |
General technical data |
|
|---|---|
| Weight | 200 g |
| Dimensions | 190 x 75 x 38 mm |
| Operating temperature | -20 to +50 °C |
| Product-/housing material | ABS |
| Battery type | 9V block battery |
| Battery life | 15 h |
| Storage temperature | -40 to +70 °C |
- Infrared thermometer for non-contact surface temperature measurements
- 10:1 optics and high resolution processor for accurate measurement results
- Easy to use thanks to the gun-style design
- Adjustable emission level
Related Products
The MCC 134 Thermocouple Measurement HAT
The MCC 134 Thermocouple Measurement HAT provides four thermocouple inputs for adding temperature measurement capability to Raspberry Pi based systems.
The DT9874 MEASURpoint USB data acquisition (DAQ) system
The DT9874 MEASURpoint USB data acquisition (DAQ) system provides simultaneous analog input along with any combination of isolated temperature, resistance and voltage measurements.
The DT8874 MEASURpoint Ethernet data acquisition (DAQ) device
The DT8874 MEASURpoint Ethernet data acquisition (DAQ) device provides simultaneous analog input and any combination of isolated temperature, resistance and voltage measurements.
The USB-2001-TC data acquisition (DAQ) device
The USB-2001-TC data acquisition (DAQ) device provides a single thermocouple input channel in a small form factor, making it an ideal solution for applications that require reliable temperature measurements at a low cost.
The TC-32 data acquisition (DAQ) system
The TC-32 data acquisition (DAQ) system provides high accuracy thermocouple inputs and includes both USB and Ethernet interfaces.
The E-TC Ethernet data acquisition (DAQ) device
The E-TC Ethernet data acquisition (DAQ) device provides high-accuracy temperature measurements over an Ethernet interface.
The USB-2416 Series of USB data acquisition (DAQ) devices
The USB-2416 Series of USB data acquisition (DAQ) devices are ideal for higher channel count applications measuring voltage or thermocouples.
The USB-2408 Series of USB data acquisition (DAQ) devices
The USB-2408 Series of USB data acquisition (DAQ) devices have 24-bit resolution for highly accurate measurements.
The USB-TEMP and TC Series USB data acquisition (DAQ) devices
The USB-TEMP and TC Series USB data acquisition (DAQ) devices provide highly accurate temperature measurements.
IR Window – Platinum Series VPT
The Platinum Series VPT infrared window is a supporting solution for monitoring the temperature in electrical cabinets or places with high danger that cannot be directly touched.
Thermal imager – testo 865 (160 x 120 pixels)
The testo 865 thermal imager offers professional technology and concentrates on functions which are needed in a contractor’s daily work. The testo 865 is a user-friendly thermal imager, optimized for fast and efficient work. With the testo ScaleAssist functions ensuring optimum setting of the thermal image scale for building thermography and the IFOV warner making sure you avoid measurement errors, you will always generate the perfect infrared image.
Infrared thermometer – testo 830 T1
The testo 830-T1 IR thermometer with laser measurement spot marker and 10:1 optics is suitable for non-contact surface temperature measurements in trade and industry.
