.svg){kind=small}
EN 16450 approved fine dust measurement device for simultaneous measurement of PM2.5 and PM10.
- Type-approved and certified according to latest EN requirements (EN 15267)
- Continuous and simultaneous real-time measurement of multiple PM values
- Additional information on particle number concentration and particle size distribution
- Adjustable time resolution from > 1 s to 24 h
- Light source: LED with high stability and long lifetime
- Long service life
- Low-maintenance
- External check of calibration on site possible
- Reliable function, very high data availability (> 99 %)
- 2 pumps in parallel operation for additional operational safety due to redundancy
- Permanent monitoring of status, among others online monitoring of calibration
- Remote monitoring, maintenance and control easily possible
- Cloud zone via Palas server for worldwide data retrieval
- No radioactive material
Variations of the Fidas® 200 System particulate matter monitor:
- Fine dust measurement device Fidas® 200 E: EN 16450 approved fine dust aerosol spectrometer for simultaneous measurement of PM2,5 and PM10, featuring a separate sensor for existing ceiling glands
- Fine dust measurement device Fidas® 200 S: EN 16450 approved fine dust aerosol spectrometer for simultaneous measurement of PM2.5 and PM10 in weatherproof cabinet for outdoor installation
*Learn more about Palas: Here
*Fanpage: DIGI TECHNOLOGIES
Technical Data |
Description |
| Interfaces | USB, Ethernet (LAN), RS232, Wi-Fi |
| Measurement range (size) | 0.18 – 18 µm (3 measurement ranges) |
| Measuring principle | Optical light scattering of single particles |
| Measurement range (number CN) | 0 – 20,000 particles/cm³ |
| Time resolution | 1 s – 24 h under certified operation: 15 min |
| Volume flow |
4.8 l/min ≙ 0.3 m3/h ± 3% (24h), complient with EN 16450 |
| Data acquisition | Digital, 20 MHz processor, 256 raw data channels |
| Light Source | LED |
| User interface | Touchscreen, 800 • 480 pixel, 7" (17.78 cm) |
| Power supply | 115-230 V; 50/60 Hz |
| Housing | Table housing, optionally with mounting brackets for rack-mounting |
| Dimensions | 450 • 320 • 180.5 mm (H • W • D), 19" |
| Weight |
Control unit: 9.3 kg Sample head: 2.25 kg Sample tube: 4.50 kg |
| Operating system | Windows |
| Data logger storage | Capacity for 2 years continuous operation at 60 s storage interval |
| Software | PDAnalyze Fidas® |
| Measurement range (mass) | 0 – 10,000 µg/m3 |
| Installation conditions | +5 – +40 °C (control unit) |
| Sampling head | Passive collector Sigma-2 |
| Response time (sensor) | < 2s |
| Linearity |
1.06 for PM2.5 1.03 for PM10 |
| Accuracy |
9.7 % for PM2.5 7.5 % for PM10 |
| Sampling System | Drying of the aerosol by IADS |
| Data | PM1, PM2.5, PM4, PM10, PMTotal , Cn, particle size distribution, air pressure, air temperature, relative humidity |
| Noise emission | < 70 dB(A) |
| Fuse | T2A |
| Resolution | 0.1 µg/m3 |
| Power consumption | Normal operation: 60 W, Maximal: 200 W |
- Regulatory pollution control in monitoring networks
- Ambient air monitoring campaigns
- Long-term studies
- Emission source attribution
- Emission dispersion studies (e.g. fires, volcanoes)
Related Products
Dilution system – PMPD 1000
Dilution system ejector for the PMP application with dilution factor 1:1000. The PMPD 1000 dilution system is a dilution system according to the ejector principle that was especially developed for the PMP application or the PMP measurement chain. The PMPD 1000 achieves a dilution factor of 1:1000 by means of a thermodiluter up to 200°C.
Dilution system – PMPD 100
Dilution system ejector for the PMP application with dilution factor 1:100 The PMPD 100 dilution system is a dilution system according to the ejector principle that was especially developed for the PMP application or the PMP measurement chain. The PMPD 100 achieves a dilution factor of 1:000 by means of a thermodiluter up to 200°C.
Dilution systems – DC 10000
The DC 10000 consists of four cascaded special dilution systems with the dilution factor 1:10. The DC 10000 dilution cascade has one aerosol inlet and four aerosol outlets. Depending on which aerosol outlet is connected to the measuring device, the aerosol with the dilution factors 1:10, 1:100, 1:1,000 or 1:10,000 are diluted and measured.
Dilution system – KHG 10
KHG 10 D dilution system heatable and pressure-resistant up to 10 bar for isothermal and isobaric dilution with a dilution factor of 1:10.
Dilution system – VKL 100
Dilution system with dilution factor 1:100 The Palas® VKL 100 dilution systems are used in vertical operation for the particle size range up to 2 µm for applications in the clean room. Dilution factors of up to 1:100,000 are achieved by cascading several VKL systems.
Dilution system – VKL 10
The VKL 10 series of dilution systems can reduce the concentration of aerosols by the dilution factor 01:10, also of very highly concentrated aerosols, in a defined and reliable way. The Palas® VKL 10 dilution systems are used in vertical operation for the particle size range up to 20 µm for powders and dusts. Dilution factors of up to 1:100,000 are achieved by cascading several VKL systems.
Dilution system – LDD 100
The dilution of large droplets is particularly important when measuring highly concentrated droplet aerosols. Since large droplets are difficult to dilute, standard systems only work up to a size of 1 – 2 μm. The newly developed dilution system LDD 10 (dilution factor 10) is the first system to dilute almost loss-free large droplets up to 10 μm.
Dilution system LDD 10
The dilution of large droplets is particularly important when measuring highly concentrated droplet aerosols. Since large droplets are difficult to dilute, standard systems only work up to a size of 1 – 2 μm. The newly developed dilution system LDD 10 (dilution factor 10) is the first system to dilute almost loss-free large droplets up to 10 μm.
LSPG 16890 system
Aerosol generator for KCl and other salt particles up to 10 μm based on ISO 16890
AGK 2000
Generation of solid particles out of suspensions, solutions and biological agents Solid particle aerosols produced from suspensions, e.g. with biological agents, and solutions such as NaCl and KCl, are required for numerous applications in research, development and quality assurance.
DNP Digital 3000
Generation of nano-scale test aerosols from graphite, silver (Ag), gold (Au), copper (Cu), etc. through condensation; Carrier gas: Nitrogen or Argon (Replacement product of the GFG 1000)
BEG 3000
Test aerosols from powder, dust, pollen, etc.; mass flow approx. 8 g/h – 7.3 kg/h; with automatic mass flow monitoring and refill unit
