Heatable modular test system for oil mist separators better as ISO 17536
HMT 1000 system
- Measurement and evaluation of fraction separation efficiency and burden
- Isothermal and isobaric measurement
- All components can be heated to 120°C
- High reproducibility of the testing method
- Internationally comparable measurement results thanks to the widespread use of the measurement system
- Cleaning and calibration can be performed autonomously by the customer
- Easy to operate, even untrained personnel can be instructed quickly in the use of the equipment
- Reliable operation
- Short set-up times, extremely low-maintenance
- Cut operating costs with HMT 1000 system
*Learn more about Palas: Here
*Fanpage: DIGI TECHNOLOGIES
Technical Data |
Description |
Measurement range (size) | 0.18 – 40 µm |
Volume flow | 1 – 25 Nm3/h,
1 – 85 Nm3/h (others on request) |
Dimensions | approx. 1,600 • 2,000 • 800 mm (H • W • D) |
Differential pressure measurement | 0 – 5,000 Pa |
Aerosol concentrations | up to 10^7 particles/cm3 with 2 KHG 10 D |
Compressed air supply | 6 – 8 bar |
- Quality assurance for oil separators
- New and further development of oil separators, e.g. coalescence separators, cyclonic separators and other inertia separators, electrofilters and filter combinations, e.g. for
1. Blow-by aerosols
2. Oil mist downstream of compressors
3. Cooling lubricants on machine tools
4. Aerosols for minimal quantity lubrication
Variations:
- HMT 1000P: Heatable modular testing system for oil nebulizers better as ISO 17536 with +/- 200 mbar control